Ürünler
Avrupa Standartlarında Yerli Üretim
Y Type Silt Trap (PN 16)
SANCAK Y-Type Silt Trap removes the particles in a fluid when the fluid is passed through a chamber equipped with a filter. It is cleaned easily and filter is replaced by removing the cover on the housing. Sediments accumulating in the housing are discharged easily by removing the brass cap on the cover. Openings on the filters of a Y-type trap minimize the fluid flow rate and pressure loss. Housing of the silt trap is made of gray cast iron and filter is made of AISI 304 stainless steel.
Description
Application areas;
- Hot, warm and cold water,
- Steam,
- Chemical fluids,
- Gas systems,
- Fluids that do not show acidic or alkaline properties,
- Compressed air,
- Industrial applications
Temperature;
- 20 °C +180 °C
Standard Materials
| 1 | Body | GG 25 |
| 2 | O-Ring | Vitor |
| 3 | Cover | GG 25 |
| 4 | Filter | CR-Nİ |
| 5 | Bolt | DIN 933 |
| Bağlantı Çapı | Ölçüler | Nominal Basınç | |||||
| DN | Ød1 | L | ØD | Øk | Øg | Ød2xn | PN |
| 25 | 1″ | 160 | 115 | 85 | 65 | Ø14×4 | 16 |
| 32 | 1 1/4″ | 180 | 140 | 100 | 76 | Ø19×4 | 16 |
| 40 | 1 1/2″ | 200 | 150 | 110 | 84 | Ø19×4 | 16 |
| 50 | 2″ | 230 | 165 | 125 | 99 | Ø19×4 | 16 |
| 65 | 2 1/2″ | 290 | 185 | 145 | 118 | Ø19×4 | 16 |
| 80 | 3″ | 310 | 200 | 160 | 132 | Ø19×8 | 16 |
| 100 | 4″ | 350 | 220 | 180 | 156 | Ø19×8 | 16 |
| 125 | 5″ | 400 | 250 | 210 | 184 | Ø19×8 | 16 |
| 150 | 6″ | 480 | 285 | 240 | 211 | Ø23×8 | 16 |
